Romet 30 (Canada)

Preparation Of Sulfadimethoxine And Ormetoprim

Antibacterial

Medicated Premix

Din 02242954

For Use In The Manufacture Of Medicated Feeds Only.

Active Ingredients

Each kilogram contains 250.0 g (25%) of sulfadimethoxine and 50.0 g (5%) of ormetoprim in a roughage product or processed grain by-product carrier suitable for incorporation into feeds.

FOR THE TREATMENT OF FURUNCULOSIS IN SALMONIDS (TROUT AND SALMON) CAUSED BY Aeromonas salmonicida STRAINS SUSCEPTIBLE TO THE SULFADIMETHOXINE AND ORMETOPRIM COMBINATION.

For Trout And Salmon

Warning

Treated Fish Must Not Be Released As Stocker Fish Or Slaughtered For Use In Food For At Least 42 Days After The Latest Treatment With This Drug When The Water Temperature Is 10°c Or Above. Do Not Use When The Water Temperature Is Below 10°c.

Directions For Use

Dosage

Administer medicated feed daily for ten consecutive days to provide approximately 15 mg of active ingredients per kg of live body weight of fish per day.

Preparation Of Medicated Feeds

Establish the weight of the fish to be treated and calculate the amount of feed needed per day according to fish size and water temperature. Calculate the amount of premix required for medicating the feed at the rate of 5 g of premix/100 kg of fish body weight per day.

Medication Of Feed Before Pelletizing Or Extruding

*Indicated as percent (%) of body weight.

Medication Of Feed After Pelletizing

Prepare a liquid slurry by suspending the premix in edible vegetable oil or 5% gelatin solution. Coat the pelleted fish feed with the slurry, which should be constantly agitated to ensure uniform suspension of the premix during addition. As a general rule, one litre of vegetable oil or gelatin solution is required to coat 25 kg of pellets. For example, to medicate 3,000 kg of fish for one day, with a 3% body weight feed intake, mix 150 g of premix with 4 litres of vegetable oil to prepare a slurry to be used for coating 90 kg of pellets. Pellets may be placed in a cement mixer (if 25 kg or more is to be coated) or spread on plastic or a smooth concrete surface for the coating process. The pellets should be mixed constantly but gently while the slurry is being slowly added to insure even distribution without undue pellet breakage. The coated pellets are then spread out and allowed to air dry for several hours. Re-bag and store under proper feed storage conditions.

Note

If fish do not show improvement within 4 to 5 days, or if signs of disease reappear after termination of treatment, re-evaluate management practices, diagnosis of outbreak, and establish susceptibility of the bacterial isolate(s) to the drug.

Labels for feeds containing Romet^® 30 must list appropriate indications, limitations, and warnings, as well as required feed ingredient information.

PHARMAQ AS, Oslo, Norway

Imported and Distributed by: Syndel Laboratories Ltd., Qualicum Beach, B.C. Canada V9K 1V5

1-800-663-2282

Nac No.